View H11AA1-M_242144.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M
PACKAGE
H11AA3-M
H11AA4-M
SCHEMATIC
1
6 BASE
2
5 COLL
3
4 EMITTER
DESCRIPTION
The H11AAX-M series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output.
FEATURES
* * * * Bi-polar emitter input Built-in reverse polarity input protection Underwriters Laboratory (UL) recognized File #E90700, Volume 2 VDE approved File #102497 (ordering option `V')
APPLICATIONS
* AC line monitor * Unknown polarity DC sensor * Telephone line interface
(c) 2004 Fairchild Semiconductor Corporation
Page 1 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
ABSOLUTE MAXIMUM RATINGS (TA =25C Unless otherwise specified)
Parameter TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Total Device Power Dissipation Derate Linearly From 25C EMITTER Continuous Forward Current Forward Current - Peak (1 s pulse, 300 pps) LED Power Dissipation Derate Linearly From 25C DETECTOR Continuous Collector Current Detector Power Dissipation Derate linearity from 25C IC PD All All 50 150 1.76 mA mW mW/C IF IF(pk) PD All All All 60 1.0 120 1.41 mA A mW mW/C TSTG TOPR TSOL PD All All All All -40 to +150 -40 to +100 260 for 10 sec 250 2.94 C C C mW mW/C Symbol Device Value Units
ELECTRICAL CHARACTERISTICS (TA = 25C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter EMITTER Input Forward Voltage Capacitance DETECTOR Breakdown Voltage Collector to Emitter Collector to Base Emitter to Base Emitter to Collector Leakage Current Collector to Emitter Capacitance Collector to Emitter Collector to Base Emitter to Base *Typical values at TA = 25C
(c) 2004 Fairchild Semiconductor Corporation
Test Conditions
Symbol
Device
Min
Typ*
Max
Unit
IF = 10 mA VF = 0 V, f = 1.0 MHz
VF CJ
All All
1.17 80
1.5
V pF
IC = 1.0 mA, IF = 0 IC = 100 A, IF = 0 IE = 100 A, IF = 0 IE = 100 A, IF = 0
BVCEO BVCBO BVEBO BVECO
All All All All H11AA1,3,4(-M) H11AA2-M All All All
30 70 5 7
100 120 10 10 1 1 10 80 15 50 200
V V V V
VCE = 10 V, IF = 0
ICEO
nA
VCE = 0, f = 1 MHz VCB = 0, f = 1 MHz VEB = 0, f = 1 MHz
CCE CCB CEB
pF pF pF
Page 2 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
TRANSFER CHARACTERISTICS (TA = 25C Unless otherwise specified.)
Characteristics Test Conditions Symbol Device H11AA4-M Current Transfer Ratio, Collector to Emitter IF = 10 mA, VCE = 10 V CTRCE H11AA3-M H11AA1-M H11AA2-M Current Transfer Ratio, Symmetry Saturation Voltage Collector to Emitter IF = 10 mA, VCE = 10 V (Figure 11) IF = 10 mA, ICE = 0.5 mA VCE(SAT) All All Min 100 50 20 10 .33 3.0 .40 V % Typ* Max Units
ISOLATION CHARACTERISTICS
Characteristic Package Capacitance input/output Isolation Voltage Isolation Resistance *Typical values at TA = 25C Test Conditions VI-O = 0, f = 1 MHz f = 60 Hz, t = 1 sec. VI-O = 500 VDC Symbol CI-O VISO RISO 7500 1011 Min Typ* 0.7 Max Units pF Vac(pk)
(c) 2004 Fairchild Semiconductor Corporation
Page 3 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
Fig. 1 Input Voltage vs. Input Current
100 TA = 25C 80
1.2 1.4
Fig. 2 Normalized CTR vs. Forward Current
TA = 25C VCE = 5V Normalized to IF = 10mA
I F - INPUT CURRENT (mA)
60 40 20 0 -20 -40 -60
0.2 1.0
NORMALIZED CTR
0.8
0.6
0.4
-80 -100 -2.0
0.0
-1.5
-1.0
-0.5
0.0
0.5
1.0
1.5
2.0
0
5
10
15
20
VF - INPUT VOLTAGE (V)
IF - FORWARD CURRENT (mA)
Fig. 3 Normalized CTR vs. Ambient Temperature
1.4 VCE = 5V Normalized to IF = 10mA, TA = 25C 1.2 IF = 10mA
Fig. 4 CTR vs. RBE (Unsaturated)
1.0
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
V 0.9 0.8 0.7
CE
= 5V
TA = 25C
NORMALIZED CTR
1.0 IF = 5mA 0.8 IF = 20mA 0.6
IF = 20mA
0.6
IF = 10mA
0.5
IF = 5mA
0.4 0.3 0.2 0.1 0.0 10 100 1000
0.4
0.2 -60 -40 -20 0 20 40 60 80 100
TA - AMBIENT TEMPERATURE (C)
RBE - BASE RESISTANCE (k)
Fig. 5 CTR vs. RBE (Saturated)
1.0
Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
100 T = 25C
A
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
V 0.9 0.8 0.7
CE
= 0.3V
TA = 25C
10
IF = 20mA 0.6 IF = 10mA 0.5 IF = 5mA 0.4 0.3 0.2 0.1 0.0 10 100 1000
1
IF = 2.5mA
IF = 5mA
0.1
0.01
IF = 10mA
IF = 20mA
RBE- BASE RESISTANCE (k )
0.001 0.01
0.1
1
10
IC - COLLECTOR CURRENT (mA)
(c) 2004 Fairchild Semiconductor Corporation
Page 4 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M
1000 IF = 10mA VCC = 10V T = 25C
A
H11AA2-M
H11AA3-M
Fig. 8 Normalized ton vs. RBE
7 VCC = 10V IC = 2mA RL = 100 T = 25C
A
H11AA4-M
Fig. 7 Switching Speed vs. Load Resistor
100
NORMALIZED ton - (ton(RBE) / ton(open))
6
SWITCHING SPEED - (s)
5
Toff 10
Tf
4
3
Ton 1 Tr
2
1
0.1 0.1 1 10 100
0 10 100 1000 10000 100000
R-LOAD RESISTOR (k)
RBE- BASE RESISTANCE (k )
Fig. 9 Normalized toff vs. RBE
3.0
10000
Fig. 10 Dark Current vs. Ambient Temperature
ICEO - COLLECTOR -EMITTER DARK CURRENT (nA)
NORMALIZED toff - (toff(RBE) / toff(open))
2.5
VCC = 10V IC = 2mA RL = 100 T = 25C
A
1000
2.0
100
1.5
10
VCE = 30V
VCE = 10V
1.0
1
0.5
0.0 10 100 1000 10000 100000
0.1 0 20 40 60 80 100
RBE- BASE RESISTANCE (k)
TA - AMBIENT TEMPERATURE (C)
Fig. 11 Output Symmetry Characteristics
10 5
NORMALIZED OUTPUT CURRENT
IF = 1 .5 IF =
I - 10mA I I 10mA I
.1 .05
NORMALIZED TO: VCE = 10 V IF = 10 mA THE MAXIMUM PEAK OUTPUT CURRENT WILL BE NO MORE THAN THREE TIMES THE MINIMUM PEAK OUTPUT CURRENT AT IF = 10 mA .05 .1 .5 1 5 10
.01 .005
.01
VCE - COLLECTOR TO EMITTER VOLTAGE (V)
(c) 2004 Fairchild Semiconductor Corporation
Page 5 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
Package Dimensions (Through Hole)
0.350 (8.89) 0.320 (8.13)
Package Dimensions (Surface Mount)
0.350 (8.89) 0.320 (8.13)
0.260 (6.60) 0.240 (6.10)
0.260 (6.60) 0.240 (6.10)
0.390 (9.90) 0.332 (8.43)
0.070 (1.77) 0.040 (1.02)
0.070 (1.77) 0.040 (1.02)
0.014 (0.36) 0.010 (0.25) 0.320 (8.13)
0.320 (8.13) 0.014 (0.36) 0.010 (0.25)
0.200 (5.08) 0.115 (2.93)
0.200 (5.08) 0.115 (2.93)
0.012 (0.30) 0.008 (0.20)
0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.100 (2.54) 15 0.012 (0.30)
0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41)
0.100 [2.54] 0.035 (0.88) 0.006 (0.16)
Package Dimensions (0.4" Lead Spacing)
0.350 (8.89) 0.320 (8.13)
Recommended Pad Layout for Surface Mount Leadform
0.260 (6.60) 0.240 (6.10)
0.070 (1.78)
0.060 (1.52)
0.070 (1.77) 0.040 (1.02)
0.014 (0.36) 0.010 (0.25)
0.425 (10.79)
0.100 (2.54) 0.305 (7.75) 0.030 (0.76)
0.200 (5.08) 0.115 (2.93)
0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] 0.012 (0.30) 0.008 (0.21) 0.425 (10.80) 0.400 (10.16)
NOTE All dimensions are in inches (millimeters)
(c) 2004 Fairchild Semiconductor Corporation
Page 6 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
ORDERING INFORMATION
Option/Order Entry Identifier S SR2 T V TV SV SR2V Description Surface Mount Lead Bend Surface Mount; Tape and Reel 0.4" Lead Spacing VDE 0884 VDE 0884, 0.4" Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape & Reel
MARKING INFORMATION
1
H11AA1 V
3 4
2 6
X YY Q
5
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) One digit year code, e.g., `3' Two digit work week ranging from `01' to `53' Assembly package code
*Note - Parts that do not have the `V' option (see definition 3 above) that are marked with date code `325' or earlier are marked in portrait format.
(c) 2004 Fairchild Semiconductor Corporation
Page 7 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
Carrier Tape Specifications
12.0 0.1 4.5 0.20 2.0 0.05 0.30 0.05 4.0 0.1 O1.5 MIN 1.75 0.10
11.5 1.0 21.0 0.1 9.1 0.20 24.0 0.3
0.1 MAX
10.1 0.20
O1.5 0.1/-0
User Direction of Feed
NOTE All dimensions are in inches (millimeters)
Reflow Profile (White Package, -M Suffix)
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 245C peak
230C, 10-30 s
Time above 183C, 120-180 sec Ramp up = 2-10C/sec * Peak reflow temperature: 245C (package surface temperature) * Time of temperature higher than 183C for 120-180 seconds * One time soldering reflow is recommended 3.5 4 4.5
3
Time (Minute)
(c) 2004 Fairchild Semiconductor Corporation
Page 8 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
H11AA1-M H11AA2-M H11AA3-M H11AA4-M
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
(c) 2004 Fairchild Semiconductor Corporation
Page 9 of 9
1/9/04

▲Up To Search▲

Price & Availability of H11AA1-M

	To Download H11AA1-M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .